How to choose a tent: tourist, fishing, camping. How to choose a tent: tourist, fishing, camping Why there is no “low price” characteristic

A GIFT - A SET OF SPARE CONNECTING FASTENERS IN CASE OF LOSS!!!

This 12 sq. m. will comfortably accommodate 13 people.

Don't forget to take the Campack Tent G-3401W with you when you go out into the countryside.

The modification with the W index is equipped with additional external wind and moisture protective fabrics with a zipper and has taped seams for protection from adverse weather conditions.

This capacious awning will help organize a comfortable space, protected from all the whims of the weather, wherever you are.

The awning has the shape of a rectangle, and the overall internal area of 12 sq.m will allow you to freely place camping furniture and have breakfasts and lunches in the fresh air with the whole family. With the Campack Tent G-3401W, you will no longer have questions about where to sit in the evening with friends and eat barbecue.

Thanks to its characteristics, the awning will be incredibly useful for all kinds of trips to hiking, camping, fishing or hunting.

A strong steel frame will not allow strong winds to affect your rest, and for additional fixation of the tent, it is recommended to use the pegs and braces that come with the kit.

All 4 sides are equipped with a mosquito net to keep insects out. Mosquitoes are duplicated from above with wind-moisture-protective cloths. They roll up and fasten at the top with loops. Raise all the canvases, leaving only the mosquito net, and enjoy the views of nature.

Campack Tent G-3401W has 2 entrances located opposite each other along the long sides of the awning. Each entrance has a zipper in the middle of the wall, which allows you to open both halves completely, or leave one half of the entrance closed.

You can not be afraid that the sudden rain will spoil your vacation - all the seams of the tent are taped. A the material of the awning has a waterproof impregnation of 3000 mm water column.

Campack Tent G-3401W is sure to come in handy:

At a campsite, a tourist rally as a central gathering place.

As a camping kitchen or dining room;

In the country instead of a stationary gazebo;

As a reliable shelter when going fishing or hunting.

Such a capacious awning tent with excellent characteristics will help you spend time outdoors in the most comfortable conditions.

In this tent, with an inscribed circle diameter of 3 m, you can place a round pool with a diameter of no more than 2.8 m.

Before buying a tent, you need to understand what you are buying and for what purposes. The choice of tents on the modern market is very large, so you can’t do without a preliminary educational program. In this article, we will review the existing types of tents according to different criteria.

The most important thing to decide on initially is the purpose of the tent, i.e. the conditions under which it will be used. There are the following types of tents for use:

🎒 Tourist tents

Before buying a tent, you need to understand what you are buying and for what purposes. The choice of tents on the modern market is very large, so you can’t do without a preliminary educational program. In this section, we review the existing types of tourist tents according to different criteria. Camping and fishing see below.

By appointment

The most important thing to decide on initially is the appointment of a tourist tent, i.e. the conditions under which it will be used. There are the following tent types by use:

By shape

In general terms, the design of the tent is a frame with an awning stretched over it. But there are nuances, for example, the shape of the tent. Form is important not only from a decorative point of view, but also from a purely practical point of view.

The shape of the tent primarily affects its capacity and stability. For example, a hemisphere will be less spacious than a half-barrel, but more stable. The shape of the coffin is chosen by solo travelers, and the tent-tent will appeal to lovers of spacious tents.

Types of tourist tents in shape:

By water resistance

Of course, a camping tent must retain moisture. At a minimum, it must hold 2000 mm of water column. But for more or less serious hikes, it is advisable to choose a tent with water resistance. 3000 mm and above.

For extreme conditions (for example, for mountain climbing), there are awnings with a water resistance of 10000-20000 mm. In addition to excellent water resistance, they are highly resistant to abrasion and also protect against strong winds.

Also, pay attention to the seams. Good seams are glued - in this case, the tent will last for many years and will not create unpleasant problems with leakage. The welded seams are even more reliable and durable.

By season of use

Summer tents. Used in summer in good climatic conditions. The design of the tent for summer operation does not provide for its use in stormy winds and thunderstorms. The main advantages are good ventilation, compactness and low price.
Three season tents. They provide excellent protection even in rainy and dank weather. Designed for spring, summer and autumn.
All season tents. This type of tent is designed for any weather, including cold and storm. Can be used all year round. The main differences are high water resistance, wind resistance, the presence of a snow skirt.

By number of seats and size

Decide how many people should fit in your tent. The most common answer is 2-3 people. But maybe you like to travel alone or vice versa - with the whole family? The number of places in a tent is usually indicated in the description, but it can also be calculated based on the total living area. 50 sq.m. is enough for one person. cm.

Height: The height of the tent determines not only the degree of comfort, but also the speed of warming up the tent. For example, one person in a spacious camping tent may not warm it with his breath for the whole night.

Tambour: Often tents provide a vestibule for storing things. You will have to choose: a lightweight tent with things in the living compartment or a heavier, but spacious tent. The absence of a vestibule reduces the volume and weight of the tent. However, in the rain, the vestibule will help save space in the living compartment, because you can move unnecessary things into it.

By material

Dry and wet nylon on the example of a tent

In our century, almost all tents are made of synthetic materials. If the tent is two-layer, then the outer layer (awning) should be durable and waterproof), and the inner one, on the contrary, should be light and breathable. The bottom of the tent is usually also waterproof and reinforced.

Polyamide fibers (Nylon, Nylon Taffeta, nylon): very strong, light, abrasion resistant, cheap, but not resistant to ultraviolet radiation and stretch when wet.
Polyester fibers (Polyester, lavsan, Poly Taffeta) - all the advantages of polyamide fibers + UV resistance and stretching. Minus - high cost.

Why is there no "low price" feature?

Trick question :) Because there are no cheap tents with excellent performance. All this is interconnected.

Let's say you have chosen a light and compact tent. If at the same time it is cheap, then 99% of it uses bad materials. And such a tent will either leak in heavy rain, or it will have poor ventilation, which will lead to getting wet from the inside.

Another example: arcs are usually made of either fiberglass or aluminum alloys. Fiberglass is cheaper, but aluminum is lighter.

One way or another, there is only one conclusion: free cheese is only in a mousetrap!

A versatile tent “for everything”!

A question that torments many: which store has the best hiking tents? :) Many people want versatility and are looking for a tent that can fit most camping trips. And something like that really exists. The criteria for an “average” tent are approximately the following:

Shape - hemisphere
capacity - 2-3 people,
material - polyester, two-layer,
water resistance - 2000 mm water column,
frame is fiberglass.

Such a tent fits best into the criteria of universality and will serve you faithfully in almost any camping conditions, except for the very extreme ones.

And yet, which tourist tent is better?

Talk about what kind of tents are good will never stop. And yet, what if the choice fell on two similar tents, and you like both of them? In this case, you need to remember that you always have to sacrifice something.

Let's take for example two tents with the same characteristics, but different shapes: one is a hemisphere, the other is a semi-barrel. If you prefer a hemisphere, then it will be cramped in it than in a half-barrel. But if the choice falls on a half-barrel, then although it is more comfortable, it is less stable in strong gusts of wind.

A fiberglass frame is heavier than aluminum, but cheaper than aluminum.

A single-layer tent is lighter in weight and easier to assemble, but a two-layer tent has better ventilation.

Quick-mount tents assemble in less than a minute, but they are very bulky when folded.

And so it is with everything. The moral is simple: you should always be aware of the pros and cons of each design feature, and then you can easily buy a good tent.

First of all, decide on your own needs and the purpose of the tent, then study and select the appropriate type of material, frame, shape of the tent ... Be guided by the above points. Well, then weed out the tents at an acceptable price range for you.

🐟 Fishing tents

Fishing is a popular modern activity for men and women of all ages. This is not just a way to diversify your diet with fresh fish, but an opportunity to relax and have a good time in nature.

Features of fishing and the desire to stay in the fresh air longer lead to the need for overnight stays near water bodies. However, a good fishing tent is not only suitable for overnight stays. When fishing on ice, this is protection from the chilly wind and cold in the middle of the lake, this is your corner of comfort in nature, which will allow you to conveniently place equipment and provisions, and also protect you from prying eyes or adverse weather conditions. In order to decide which fishing tent to choose, consider the main criteria that directly affect its parameters.

Seasonality of the tent

Ice fishing winter tent. It has various designs, which we will consider next. As a rule, its bottom is unfastened or absent for the possibility of ice fishing through the hole.
Summer “coastal” tent. The most common type is an ordinary tourist tent. They combine light weight, compactness and comfort for its inhabitant. A tent with things is set up near the water, and its owner fishes from the shore or from a boat.
Winter “coastal” tent. This is also a typical tourist tent, which differs from the summer tent in a denser bottom and the presence of the so-called “snow skirt”. This is an additional canopy at the bottom of the awning, which prevents snow from getting under the awning.

What design can be a fishing tent?

1) Dome frame tents. A fairly common option among fishermen and tourists. It can be single-layer or double-layer, with or without a vestibule. Arcs can be composite or aluminum alloys. The latter are more expensive, however, they are lighter and behave well in the cold, which is very important for winter fishing;

2) Quick-folding fishing tents. They do not require a long installation and are very convenient, because upon arrival at the place you can set up a camp in a matter of minutes and start fishing directly. In winter fishing, this is especially true when you need to regularly move from place to place. This view is represented by several design options:

Tent material. The fisherman's tent should be waterproof and windproof, but at the same time breathable. This will create the necessary comfort inside and will not allow condensation to accumulate. Seams and windows must be taped! There are also tents with an additional layer of insulation.
awning color. Tents for winter fishing, as a rule, are bright light colors. Colorful tents are more visible in the snow in case of unforeseen situations, while white tents, on the contrary, allow you to hide your stay. We also note that in a dark-colored tent there will be little light even during the day, and in a white, blue and yellow tent it will be much lighter.
Bottom. Tents for ice fishing in the vast majority of cases are not equipped with a bottom. But there are exceptions - tents with an unbuttoned bottom. Coastal tents usually come with a bottom in the kit.
Speed and ease of installation. The fisherman does not always have the time and desire to tinker with the collection of multi-stage arcs. In addition, unlike tourists, who mostly travel collectively, the fisherman is often alone, and therefore the tent should be easily set up alone. A good option are the previously discussed tents with a quick installation mechanism.
wind resistance. Summer and winter fishing can meet the angler with inclement weather. This issue becomes especially acute in large open areas of frozen reservoirs, where there is simply no protection from the wind. Before you buy a fishing tent, be sure to check if the kit includes pegs, screws and a sufficient number of storm guy lines.
Tent capacity. At least the fisherman himself, as well as his belongings and gear, should be placed in the tent. If we are talking about the winter period, you also need to take into account the dimensions of warm clothes. Before you buy a winter tent, for example, for two, check whether its internal volume will allow two fishermen to stay in warm clothes and with things;
Equipment. Check with the seller if screws are included for setting up a tent on ice. They are usually purchased separately.
Pleasant trifles. This includes details that will make your stay in the tent more comfortable, such as additional internal nets, hooks and pockets for small items, opening windows for outdoor viewing, reflective stretch marks, etc.
Accessories. Do not forget that for ice fishing, in addition to the tent itself, you will at least need an ice screw. Another indispensable accessory for anglers has become a winter box that performs several functions at once: gear storage, seat, catch storage. You can’t drive across the frozen lake by car, so fishing sleds can also be useful for transporting things.

When you need to spend a lot of time over the hole in low temperature conditions, the question of heating the tent becomes acute. We categorically do not recommend the use of open flames! The tents burn very quickly, barely enough time to save yourself, let alone pack your belongings. Instead, it is better to use safe catalytic or infrared heaters. Or a closed stove. Note that any heater for a tent should not be left on at night, placed close to an awning or combustible materials.

Conclusion

It is quite difficult to answer directly which is the best tent for fishing. In view of the many conflicting factors, this concept is purely individual. We have reviewed the main criteria for choosing fishing tents for various needs and we hope that this material was useful to you.

🏕️ Camping tents

Among the fans of active sports there are many people who prefer maximum comfort even when relaxing in nature. It is also very common for people to get out of the city and camp for a few days, without day trips.

Indispensable helpers in such conditions will be large camping tents.

Benefits of a camping tent

Camping tents are large and roomy. One tent solves the issue of living in nature for up to eight people;
The opportunity to gather the whole company under one roof in bad weather;
The height of the camping tent allows you to straighten up inside it to your full height;
The tents are divided into several compartments where individual families can live. You can also organize male and female “rooms”, or place children separately;
In the central vestibule of such a tent, you can arrange a weatherproof kitchen;
The camping tent has up to four entrances, which provides comfortable access to things stored inside.

Minuses

Tent weight. A camping tent can weigh over 10-15 kg, which becomes a problem when transporting it on foot. The disadvantage is leveled by dividing the tent into several parts (awning, arcs, inner dwellings) or transporting by car;
Tent sail. Due to their height and size, some camping tents do not handle strong winds very well. When installing, secure all its braces well;
Footprint. Large tents are more difficult to set up in a clearing you like due to the need for flat areas of sufficient size;
Price. Since these are the largest tents, they are not cheap. It is sometimes expensive to buy a large camping tent on your own, because often two families or a group of friends buy it together.

purpose

Parking in nature with increased comfort, including multi-day parking;
Autotourism with overnight stays in campsites. Spending the night in a house on the campsite is much more expensive than renting a place for a tent. As a rule, the payment for such a place is fixed, whether it is a double “turtle” or a six-seater tent;
Fishing tents. In recent years, large fishing tents have become increasingly popular among anglers;
Tents for children. Children's large tents are often set up in the summer in the yards of private houses. Children willingly play in them, while spending time outdoors and in shelter from the scorching sun.

Frame types

In the first two designs, the living compartments are fastened inside the tent on a kind of “buttons”. The remaining space is a vestibule.

Quick-folding tents do not require additional internal installation. After installing it, it is enough to fix the braces. In addition to cost, their known disadvantage is low maintainability in the event of a violation of the integrity of the frame. But, despite this, many tourists appreciate them for the convenience and speed of installation, and therefore such camping tents are gradually conquering the market.

How to choose a camping tent?

Let's list the main points:

Water resistance. Before you buy a large camping tent, check that the tent has a water resistance of at least 2000 mm and a bottom of at least 3000 mm. The seams must be taped;
Strength. Thick fabric increases the weight of the tent. But if you choose a camping tent, the weight of which is a priori large, then take care of high-quality fabric. Polyester fabrics are optimal for a camping tent awning, reinforced polyethylene for the bottom;
arcs. If your choice fell on a camping tent with arcs, then it is better that they be made of aluminum or its alloys. They are more expensive, but lighter and more reliable than fiberglass poles;
Mosquito nets. The windows and doors of the tent should be double - the outer layer is made of awning fabric, the inner layer is made of mesh. This makes it possible to ventilate the tent without unscheduled insect visits.
accessories. Fittings from trusted manufacturers, such as YKK, are preferred.

A good bonus to a camping tent will be inside pockets, various hooks and loops. Some manufacturers have gone far ahead in terms of the comfort of their products and even embed lighting in them.

Organization of living space

In an effort to stand out from the competition, manufacturers of large tents offer a variety of ways to accommodate residents. Consider the most common:

A large camping tent is your comfortable home in nature. Take care of it in advance and enjoy a well-deserved rest!

A GIFT - A SET OF SPARE CONNECTING FASTENERS IN CASE OF LOSS!!!

This 12 sq. m. will comfortably accommodate 13 people.

Don't forget to take the Campack Tent G-3401W with you when you go out into the countryside.

The modification with the W index is equipped with additional external wind and moisture protective fabrics with a zipper and has taped seams to protect against adverse weather conditions.

This capacious awning will help organize a comfortable space, protected from all the whims of the weather, wherever you are.

The awning has the shape of a rectangle, and the total internal area of 12 sq.m will allow you to freely place camping furniture and have breakfasts and lunches in the fresh air with the whole family. With the Campack Tent G-3401W, you will no longer have questions about where to sit in the evening with friends and eat barbecue.

Thanks to its characteristics, the awning will be incredibly useful for all kinds of trips to hiking, camping, fishing or hunting.

A strong steel frame will not allow strong winds to affect your rest, and for additional fixation of the tent, it is recommended to use the pegs and braces that come with the kit.

All 4 sides are equipped with a mosquito net to keep insects out. Mosquitoes are duplicated on top with wind-moisture-protective fabrics. They are rolled up and fixed at the top with loops. Raise all the canvases, leaving only the mosquito net, and enjoy the views of nature.

Campack Tent G-3401W has 2 entrances located opposite each other along the long sides of the tent. Each entrance has a zipper in the middle of the wall, which allows you to open both halves completely, or leave one half of the entrance closed.

You can not be afraid that the sudden rain will spoil your vacation - all the seams of the tent are taped. And the material of the awning has a waterproof impregnation of 3000 mm of water column.

Campack Tent G-3401W is sure to come in handy:

At a campsite, a tourist rally as a central gathering place.

As a camping kitchen or dining room;

In the country instead of a stationary gazebo;

As a reliable shelter when going fishing or hunting.

Such a capacious awning tent with excellent characteristics will help you spend time outdoors in the most comfortable conditions.

Often such tents are used as an awning over the pool, so that debris and leaves do not get there, and also to protect themselves from the sun, and maybe even rain. And tents with mosquito nets will also perfectly protect bathers from insects.
In this tent, with an inscribed circle diameter of 3 m, you can place a round pool with a diameter of no more than 2.8 m.

Compact single-layer tourist tent Lake Traveler 4 for light hiking and camping. Light weight, ease of assembly, roomy vestibule - the main distinguishing features of this model. The tent is equipped with mosquito nets and ventilation windows. The strengthened floor from the reinforced polyethylene will reliably protect from moisture. A framework - fiberglas of 7,9/8,5 mm. Floor material-reinforced polyethylene (tarpauling) Height-130 Quantity of places-4 Water resistance-Tent 2000 mm, bottom 10000 mm Seam processing-glued seams. Outer Material - 185T P. Taffeta PU 2000mm Color Version - Olive Type - Tourist All Sizes - 210 + 120(L)x240(W)x130(H)cm Features - Single Layer Tent, 1 Entrance, Roof Vent, Mosquito Net . Warranty - 1 year Dimensions - 57 × 18 × 18 cm

The Campack Tent Peak Explorer 5 is designed for families. Increased size, large windows - everything possible has been done for a comfortable outdoor recreation. The high-strength bottom is made of reinforced polyethylene that does not allow moisture to pass through and is resistant to abrasion. The Campack Tent Peak Explorer 5 is equipped with oversized ventilation windows, a slanting rain flap and a two-layer door with colored zippers. The inside of the tent has a lantern hanger and pockets for storing small items. Campack Tent Peak Explorer 5 has two separate entrances. The main entrance is securely protected by side awning "wings" that prevent cold air from blowing in. And transparent windows with "blinds" will help regulate the light in the tent. Taped seams guarantee tightness in any situation. Frame-fiberglass 9.5 mm / 11 mm. The material of the floor is reinforced polyethylene (tarpauling). Height-180 Quantity of places-5 Water resistance-Tent 3000 mm, bottom 10000 mm. Seam processing - taped seams. External material - P.Taffeta 190T PU 3000 mm. Material internal-P.Taffeta 170T. Color version - gray / blue, brown / orange 2 entrances, 2 mosquito net windows with curtains, mosquito net, pockets for storing small items, transparent inserts in the vestibule.

Tourist tent with three entrances and a bedroom for four, a spacious vestibule. The mosquito net will not allow flying insects to get inside. The fabric of the inner tent is made of polyester fibers and is breathable. All seams are taped. Mosquito net consists of many small cells. 11 mm fiberglass frame. The material of the floor is reinforced polyethylene (tarpauling). Height-195 Quantity of places-4 Processing of seams-glued seams. External material - P.Taffeta 190T PU 3000 mm. Material internal-P.Taffeta 170T. Type - Camping All sizes - Outer tent 505(L)x310(W)x195(H) cm, Inner tent 275(L)x280(W)x187(H) cm.

The Campack Tent Land Explorer 3 is perfect for easy hikes and family vacations in nature during the warm season. The high-strength bottom is made of the reinforced polyethylene does not pass moisture, moisture resistance-10000 mm. in Art., and resistant to abrasion. The frame, made of fiberglass, provides reliable stability. The Campack Tent Land Explorer 3 features oversized ventilation windows, an anti-slanting rain flap and a two-layer door with colored zippers. Inside the tent there is a pendant for a lantern and pockets for storing small items. In the voluminous vestibule you can hide from the rain. Taped seams guarantee tightness in any situation. 7.9 mm/8.5 mm fiberglass frame. The material of the floor is reinforced polyethylene (tarpauling). Height-135 Quantity of places-3 Water resistance-Tent 3000 mm, bottom 10000 mm. Seam processing - taped seams. Material outer-P. Taffeta 190T PU 3000 mm. Material internal-P.Taffeta 170T. Color version-green Type-tourist All sizes-outer tent 310(L)x225(W)x135(H) cm, inner tent 210(L)x210(W)x130(H) cm. back wall, mosquito net, pocket for small items, design with increased wind resistance.

Weight: 5 kg. Water resistance: 3000 mm. All dimensions: 280 x 218 cm. Height: 130 cm. Warranty: 6 months. Frame: fiberglass. Inner material: P.Taffeta 170T. The fabric is made of polyester in Floor material: reinforced polyethylene (tarpauling). Outer material: P.Taffeta 190T PU . The fabric is made of polyester. Seam treatment: taped. packing weight kg: 5.3 packing dimensions cm: 62*22*20 Campack-Tent is a "classic" of tourist tents. Thanks to the new design and the third arc, the tent has increased the size of the vestibule, and two entrances and large enough ventilation holes will ensure comfort even at high temperatures. Tent Campack Tent Hill Explorer 2 is a comfortable double tent with the ability to comfortably accommodate not only tourists, but also place things. General characteristics Purpose: trekking Inner tent: yes Number of seats: 2 Frame type: inner Geometry: hemisphere Design Number of entrances / rooms: 2 / 1 Number of tambours: 2 Windows: no Inner pockets: no Storm braces: yes Canopy: no Protection /bottom: 3000 / 10000 mm w.st. Wind/snow skirt: no Mosquito net: yes UV protection: no Materials Tarpaulin material: polyester (Taffeta 190T PU) Bottom material: polyethylene (Tarpaulin 10x10) Inner tent material: polyester (Taffeta 170T) Pole material: fiberglass Pole diameter: 8.5 mm Dimensions and weight External tent dimensions (LxWxH): 280x218x130 cm Weight: 5 kg Terminology: Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents designed for one or two travelers. Camping tents are the heaviest, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. These tents can accommodate up to 20 people (for details, see "Number of seats"). Windproof/snowproof skirt The presence of a protective skirt along the bottom edge of the tent. The skirt is a strip of fabric around the perimeter of the tent, which is adjacent directly to the ground. It can be either sewn or removable. The presence of a skirt is essential when using tents in the mountains, in winter or just at low temperatures. The skirt will not allow snow or rain to penetrate into the cracks formed by the edge of the tent and irregularities in the established place. Internal pockets The presence of internal pockets will allow you to organize the space inside the tent. Inner tent The presence of an inner tent, which in some cases can be installed separately from the awning. Models with an inner tent are usually called two-layer. The outer layer (awning) is waterproof and strong, protects from rain, and the inner layer is breathable and very light. Single-layer tents are lightweight and have a small volume when assembled. Their disadvantage is that condensate accumulates on the walls of the tent, while in two-layer drops they will roll down without penetrating into the living space. Water resistance of the tent (from 300 to 20000 mm w.st.) The maximum height of the water column that the tent awning can withstand. This parameter determines the water resistance of the material from which the tent is made. For areas with rare rains, tents with a water resistance rating of 500 - 3000 mm of water column are suitable. If the probability of rain is high, showers are possible, then it is advisable to choose tents with an awning water resistance of more than 3000 mm in. Art. The value of this parameter can sometimes reach up to 10,000 mm in. Art. Among the disadvantages of fabrics with high water resistance, one can note a relatively greater weight and high cost. Geometry Some of its properties depend on the shape of the tent. The hemisphere resists the wind well, but has less living space compared to the semi-barrel. Typically, in such tents, the frame consists of two intersecting arcs. The half-barrel has a large interior space. In addition, usually a significant part of such a tent is reserved for a vestibule, which looks very attractive as base stations or for a long stay in nature. Gable and tent geometry are still used, but only in the production of very simple models or large tents (for expedition groups). In such a tent you can gather in a large company. Non-standard models - those in which the frame design can combine several types. For example, half-barrel and hemisphere are used to produce large two-room camping tents. Pole diameter (from 0.0 to 30.0 mm) The size of the poles of the tent. Depending on the required characteristics, the arcs for the frame may have different diameters. Accordingly, the thicker the arcs, the more rigid they are, but at the same time less plastic. Sometimes arcs with different diameters are used. In such tents, the arcs that take on the main load are thicker, and the additional ones (to hold the shape or give greater stability) are somewhat thinner. Number of places (from 1 to 20) The maximum number of people that can simultaneously accommodate in a tent. Number of tambours (from 0 to 4) A tambour is a space separating a room from an exit. Many modern models are equipped with it, but there are also tents without it. The tambour is usually the area between the inner tent (see "Inner tent") and the exit, which may also have a bottom. Small vestibules are used to store things, equipment. Inner tent material The name of the material from which the inner tent is made (see "Inner tent"). Nylon, produced in accordance with certain technologies (weaving, density, etc.), has the necessary strength and breathability. Polyester can also be used for inner tents. It has greater strength and wear resistance than nylon and is highly breathable. Cotton is rarely used in the manufacture of inner tents. This tent can be recommended to those who are allergic to synthetics. Among the advantages can also be noted low weight and low cost. But a tent made of such material must be thoroughly dried before storage, otherwise there is a possibility that the fabric will deteriorate. Bottom material The name of the material used to sew the bottom. Polyester is resistant to most acids and alkalis, to wear and deformation, which allows it to be widely used in the production of tent bottoms. Nylon is also often used in tent bottoms. In the production of materials, various materials processing technologies are often used. For example, Nylon Taffeta PU has a polyurethane treatment that allows it to withstand a water column pressure of 6000 mm (see "Water resistance of the bottom"). Reinforced polyethylene is mainly used for the production of the bottom of budget tents. Polyethylene has a higher specific gravity and is therefore used in the main production of camping tents (see "Intended Use"). Tarpaulin is also a good material for the bottom of tents. has a high margin of safety. PVC excludes thread connection, is a good refractory, moisture and wear-resistant material, therefore it is also often used in the manufacture of tents. Tarpaulin material The material used to make the tarpaulin of the tent. Polyester does not lose its strength when wet, tolerates ultraviolet radiation and sunlight well, and has high heat resistance. Tents made of this material have a longer service life compared to tents made of nylon. Nylon loses about 10-15% of its strength when wet, is more sensitive to UV radiation and sunlight - strength decreases over time. This material has less resistance to chemicals than polyester. Membrane fabric has two seemingly incompatible qualities: it "breathes" and at the same time has water-repellent properties. These properties are imparted to the material either by impregnation, which is applied to the fabric during production with high-temperature technology, or by the thinnest film that is glued or welded to the fabric. The combination of fabric + silicone gives tents made from this material significant advantages. Such tents have a high degree of UV resistance, which is a significant plus when used in the highlands. In addition, silicone-coated fabric is 2-3 times more durable than non-silicone coated fabrics. Subject to the rules of operation, the tent, the awning of which has a double-sided silicone coating, can last more than 10 years. Conventional tarpaulin is currently used quite rarely. The tarpaulin is heavy, but inexpensive. More often in production, tarpaulin is used as a solid base with additional coatings that improve its properties. Canopy The presence of a canopy in the design of the tent. In many camping tents, the rectangular part of the awning plays the role of a door, which can be unfastened and put on pegs, thus arranging an awning. Appointment Tourist tents according to their purpose can be classified into models for high mountains, middle mountains and plains. Tents for the highlands are considered extreme, and tents for the middle mountains and plains are divided into camping and trekking. Separately, you can select tents for fishing. Extreme tents are designed for mountain climbing and expeditions. The design of such a tent should be as rigid as possible in order to withstand the harsh conditions of the highlands (wind, snow). There are extreme tents for "Himalayan" and "Alpine" climbing styles. The Himalayan style involves the creation of several bases during the ascent, while in the Alpine style, stationary bases are not set up, and tents are carried with them. Camping tents are the most comfortable. They are intended for picnics, children's camps, campsites. Such models are often equipped with mosquito nets, adjustable ventilation holes, in addition, they may have several rooms, entrances, vestibules. Trekking tents are designed for hiking or cycling, where weight plays a significant role. Such tents must have high reliability and rigidity, because often such trips last for weeks. Fishing tents, as a rule, are not intended for overnight stays. In it you can hide from bad weather, relax. Typically, fishing tents are compact and light in weight. Frame Type The type of frame provided by the tent design. A tent with an outer frame is more convenient to put up, and at the same time, the inner tent does not get wet, since the awning is put up first. The inner frame design is more difficult to set up, but allows you to set up an inner tent without an awning (outer tent). Tents in which there is no frame are stretched on two posts or on natural supports (trees, etc.). Storm braces Availability of special braces. Due to the larger number (compared to conventional tents) and a specific fastening scheme, such guys provide a high level of frame rigidity, which is necessary during stormy winds.

Double single-layer tourist tent. Perfect for summer outdoor activities. It has one entrance protected by a mosquito net. The light weight of the tent allows you to take it with you, even if you need to carry a backpack on your back. Can withstand prolonged rain and wet weather. Fairly easy to install, and the domed design allows it to be used in light winds. Inside the tent has a pocket for small items. Terminology: Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents designed for one or two travelers. Camping tents are the heaviest, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. These tents can accommodate up to 20 people (for details, see "Number of seats").

General characteristics Purpose: trekking Inner tent: no Number of seats: 2 Frame type: outer Geometry: hemisphere Design Number of entrances / rooms: 1 / 1 Number of vestibules: no Ventilation windows: yes Windows: no Inner pockets: no Storm guy lines: yes Canopy: no Protection Seam sealing: taped Wind / snow skirt: no Mosquito net: yes UV protection: no Materials Tarpaulin material: polyester (Taffeta 190T PU) Bottom material: polyethylene (Tarpaulin 10x10) Pole material: fiberglass Pole diameter: 7 mm Dimensions and weight Dimensions outer tent (LxWxH): 182x152x122 cm Weight: 2.1 kg Terminology: Ventilation windows The presence of ventilation holes in the design of the tent. They allow you to remove moisture from the tent, to regulate the flow of fresh air. Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents designed for one or two travelers. Camping tents are the heaviest, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. These tents can accommodate up to 20 people (for details, see "Number of seats"). Windproof/snowproof skirt The presence of a protective skirt along the bottom edge of the tent. The skirt is a strip of fabric around the perimeter of the tent, which is adjacent directly to the ground. It can be either sewn or removable. The presence of a skirt is essential when using tents in the mountains, in winter or just at low temperatures. The skirt will not allow snow or rain to penetrate into the cracks formed by the edge of the tent and irregularities in the established place. Internal pockets The presence of internal pockets will allow you to organize the space inside the tent. Inner tent The presence of an inner tent, which in some cases can be installed separately from the awning. Models with an inner tent are usually called two-layer. The outer layer (awning) is waterproof and strong, protects from rain, and the inner layer is breathable and very light. Single-layer tents are lightweight and have a small volume when assembled. Their disadvantage is that condensate accumulates on the walls of the tent, while in two-layer drops they will roll down without penetrating into the living space. Water resistance of the tent (from 300 to 20000 mm w.st.) The maximum height of the water column that the tent awning can withstand. This parameter determines the water resistance of the material from which the tent is made. For areas with rare rains, tents with a water resistance rating of 500 - 3000 mm of water column are suitable. If the probability of rain is high, showers are possible, then it is advisable to choose tents with an awning water resistance of more than 3000 mm in. Art. The value of this parameter can sometimes reach up to 10,000 mm in. Art. Among the disadvantages of fabrics with high water resistance, one can note a relatively greater weight and high cost. Geometry Some of its properties depend on the shape of the tent. The hemisphere resists the wind well, but has less living space compared to the semi-barrel. Typically, in such tents, the frame consists of two intersecting arcs. The half-barrel has a large interior space. In addition, usually a significant part of such a tent is reserved for a vestibule, which looks very attractive as base stations or for a long stay in nature. Gable and tent geometry are still used, but only in the production of very simple models or large tents (for expedition groups). In such a tent you can gather in a large company. Non-standard models - those in which the frame design can combine several types. For example, half-barrel and hemisphere are used to produce large two-room camping tents. Seam sealing Method for sealing the seams of a tent. Taped seams protect the tent from water leakage. Welded seams are very reliable and durable, as they are welded with a special tape. In addition, there are tents that do not have seam sealing. Basically, these are models of the lowest category. But there are also professional tents that don't need to be sealed simply because they will stand above the rain level (above the clouds). Pole diameter (from 0.0 to 30.0 mm) The size of the poles of the tent. Depending on the required characteristics, the arcs for the frame may have different diameters. Accordingly, the thicker the arcs, the more rigid they are, but at the same time less plastic. Sometimes arcs with different diameters are used. In such tents, the arcs that take on the main load are thicker, and the additional ones (to hold the shape or give greater stability) are somewhat thinner. Number of places (from 1 to 20) The maximum number of people that can simultaneously accommodate in a tent. Number of tambours (from 0 to 4) A tambour is a space separating a room from an exit. Many modern models are equipped with it, but there are also tents without it. The tambour is usually the area between the inner tent (see fig. "Inner tent") and an exit, which can also have a bottom. Small vestibules are used to store things, equipment. Bottom material The name of the material used to sew the bottom. Polyester is resistant to most acids and alkalis, to wear and deformation, which allows it to be widely used in the production of tent bottoms. Nylon is also often used in tent bottoms. In the production of materials, various materials processing technologies are often used. For example, Nylon Taffeta PU has a polyurethane treatment that allows it to withstand a water column pressure of 6000 mm (see "Water resistance of the bottom"). Reinforced polyethylene is mainly used for the production of the bottom of budget tents. Polyethylene has a higher specific gravity and is therefore used in the main production of camping tents (see "Intended Use"). Tarpaulin is also a good material for the bottom of tents. has a high margin of safety. PVC excludes thread connection, is a good refractory, moisture and wear-resistant material, therefore it is also often used in the manufacture of tents. Tarpaulin material The material used to make the tarpaulin of the tent. Polyester does not lose its strength when wet, tolerates ultraviolet radiation and sunlight well, and has high heat resistance. Tents made of this material have a longer service life compared to tents made of nylon. Nylon loses about 10-15% of its strength when wet, is more sensitive to UV radiation and sunlight - strength decreases over time. This material has less resistance to chemicals than polyester. Membrane fabric has two seemingly incompatible qualities: it "breathes" and at the same time has water-repellent properties. These properties are imparted to the material either by impregnation, which is applied to the fabric during production with high-temperature technology, or by the thinnest film that is glued or welded to the fabric. The combination of fabric + silicone gives tents made from this material significant advantages. Such tents have a high degree of UV resistance, which is a significant plus when used in the highlands. In addition, silicone-coated fabric is 2-3 times more durable than non-silicone coated fabrics. Subject to the rules of operation, the tent, the awning of which has a double-sided silicone coating, can last more than 10 years. Conventional tarpaulin is currently used quite rarely. The tarpaulin is heavy, but inexpensive. More often in production, tarpaulin is used as a solid base with additional coatings that improve its properties. Canopy The presence of a canopy in the design of the tent. In many camping tents, the rectangular part of the awning plays the role of a door, which can be unfastened and put on pegs, thus arranging an awning. Appointment Tourist tents according to their purpose can be classified into models for high mountains, middle mountains and plains. Tents for the highlands are considered extreme, and tents for the middle mountains and plains are divided into camping and trekking. Separately, you can select tents for fishing. Extreme tents are designed for mountain climbing and expeditions. The design of such a tent should be as rigid as possible in order to withstand the harsh conditions of the highlands (wind, snow). There are extreme tents for "Himalayan" and "Alpine" climbing styles. The Himalayan style involves the creation of several bases during the ascent, while in the Alpine style, stationary bases are not set up, and tents are carried with them. Camping tents are the most comfortable. They are intended for picnics, children's camps, campsites. Such models are often equipped with mosquito nets, adjustable ventilation holes, in addition, they may have several rooms, entrances, vestibules. Trekking tents are designed for hiking or cycling, where weight plays a significant role. Such tents must have high reliability and rigidity, because often such trips last for weeks. Fishing tents, as a rule, are not intended for overnight stays. In it you can hide from bad weather, relax. Typically, fishing tents are compact and light in weight. Frame Type The type of frame provided by the tent design. A tent with an outer frame is more convenient to put up, and at the same time, the inner tent does not get wet, since the awning is put up first. The inner frame design is more difficult to set up, but allows you to set up an inner tent without an awning (outer tent). Tents in which there is no frame are stretched on two posts or on natural supports (trees, etc.). Storm braces Availability of special braces. Due to the larger number (compared to conventional tents) and a specific fastening scheme, such guys provide a high level of frame rigidity, which is necessary during stormy winds.

Campack Tent Forest Explorer 4 is a versatile dome tent for easy hiking and family outdoor activities. The high-strength bottom is made of reinforced polyethylene, does not allow moisture to pass through and is resistant to abrasion. The frame made of fiberglass provides strength and stability. The tent is equipped with enlarged ventilation windows, an oblique rain valve and a two-layer entrance with colored zippers. An additional floor in the vestibule allows for greater comfort during operation. Inside the tent there is a pendant for a lantern and pockets for storing small items. Taped seams guarantee tightness and reliability in any situation.

Tourist tent Campack Tent Forest Explorer 3 has a mosquito net, which consists of many small cells that do not allow insects to enter the tent. The inner tent is made of a fabric consisting of polyester fibers. This fabric is breathable. The material of the awning is a fabric made of polyester fibers with a polyurethane coating. All seams are taped.

The Campack Tent Forest Explorer 2 is perfect for easy hikes and family vacations in nature during the warm season. The high-strength bottom is made of reinforced polyethylene that does not allow moisture to pass through and is resistant to abrasion. The frame, made of fiberglass, provides reliable stability. The Campack Tent Forest Explorer 2 features oversized ventilation windows, an anti-slanting rain flap and a two-layer door with colored zippers. An additional floor in the vestibule allows for greater comfort during operation. Inside the tent there is a pendant for a lantern and pockets for storing small items. Taped seams guarantee tightness in any situation. Frame-fiberglass 8.5 mm Floor material-reinforced polyethylene (tarpauling) Height-120 Number of seats-2 Water resistance-3000 mm Seam treatment-taped seams External material-P.Taffeta 190T PU 3000 mm Material inner-P.Taffeta 170T Colour-green Type-touring All sizes-outer tent 290(L)x220(W)x120(H) cm, inner tent 215(L)x160(W)x115(H) cm Features- 2 entrances, vestibule floor, 2 ventilation flaps, mosquito net, lantern hanging loop, pockets for storing small items. Warranty-1 year

The Campack Tent Field Explorer 4 is perfect for easy camping trips and family vacations in nature during the warm season. The high-strength bottom is made of the reinforced polyethylene does not pass moisture, moisture resistance-10000 mm. in Art., and resistant to abrasion. The frame made of fiberglass provides strong stability. The Campack Tent Field Explorer 4 tent is equipped with oversized windows for ventilation, an anti-slanting rain valve and a two-layer door with colored zippers. Inside the tent there is a pendant for a lantern and pockets for storing small items. In the voluminous vestibule you can hide from the rain. Taped seams guarantee tightness in any situation

Weight: 4.4 kg. Water resistance: 3000 mm. All dimensions: 390*210 cm. Height: 125 cm. Warranty: 6 months. Frame: fiberglass. Inner material: P.Taffeta 170T. The fabric is made of polyester fibers, freely breathable. Floor material: reinforced polyethylene (tarpauling). Outer material: 190T P. Taffeta PU 3000MM Model: Field Explorer 3. Seam treatment: taped. packaging weight kg: 4.8 packaging dimensions cm: 60*23*23 Campack Tent Field Explorer 3 is a classic "half-shell". Tent for simple trips and family outdoor recreation is designed for use at positive temperatures. The high-strength bottom is made of reinforced polyethylene, does not allow moisture to pass through and is resistant to abrasion. The Campack Tent Field Explorer 3 features oversized ventilation windows, an anti-slanting rain flap and a two-layer door with colored zippers. The frame made of fiberglass provides reliability and stability, and the external fastening of the poles makes it much easier to set up the tent. Inside the tent there is a pendant for a lantern and pockets for storing small items. The Campack Tent Field Explorer 3 has three separate entrances. A characteristic feature is a huge vestibule where you can hide the equipment and things of all the inhabitants of the tent from bad weather, and if necessary, use it as a place for cooking. This year we paid more attention to the reliability of the tent and made additional fabric reinforcements in areas of increased load - along the perimeter, in the lower part of the tent. Taped seams guarantee tightness and reliability in any situation. General characteristics Purpose: trekking Inner tent: yes Number of seats: 3 Frame type: inner Geometry: semi-barrel Design Number of entrances / rooms: 2 / 1 Number of vestibules: 1 Ventilation windows: yes Windows: no Inner pockets: no Storm guy lines: yes Canopy: no Protection Wind / snow skirt: no Mosquito net: yes UV protection: no Materials Tarpaulin material: polyester (Taffeta 190T PU) Bottom material: polyethylene (Tarpaulin 10x10) Inner tent material: polyester (Taffeta 170) Pole material: fiberglass Pole diameter: 7.9 mm Dimensions and weight Outer tent dimensions (LxWxH): 390x210x125 cm Inner tent dimensions (LxWxH): 220x195x115 cm Weight: 4.4 kg Terminology: Ventilation windows Ventilation holes in the tent design. They allow you to remove moisture from the tent, to regulate the flow of fresh air. Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents designed for one or two travelers. Camping tents are the heaviest, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. These tents can accommodate up to 20 people (for details, see "Number of seats"). Windproof/snowproof skirt The presence of a protective skirt along the bottom edge of the tent. The skirt is a strip of fabric around the perimeter of the tent, which is adjacent directly to the ground. It can be either sewn or removable. The presence of a skirt is essential when using tents in the mountains, in winter or just at low temperatures. The skirt will not allow snow or rain to penetrate into the cracks formed by the edge of the tent and irregularities in the established place. Internal pockets The presence of internal pockets will allow you to organize the space inside the tent. Inner tent The presence of an inner tent, which in some cases can be installed separately from the awning. Models with an inner tent are usually called two-layer. The outer layer (awning) is waterproof and strong, protects from rain, and the inner layer is breathable and very light. Single-layer tents are lightweight and have a small volume when assembled. Their disadvantage is that condensate accumulates on the walls of the tent, while in two-layer drops they will roll down without penetrating into the living space. Water resistance of the tent (from 300 to 20000 mm w.st.) The maximum height of the water column that the tent awning can withstand. This parameter determines the water resistance of the material from which the tent is made. For areas with rare rains, tents with a water resistance rating of 500 - 3000 mm of water column are suitable. If the probability of rain is high, showers are possible, then it is advisable to choose tents with an awning water resistance of more than 3000 mm in. Art. The value of this parameter can sometimes reach up to 10,000 mm in. Art. Among the disadvantages of fabrics with high water resistance, one can note a relatively greater weight and high cost. Geometry Some of its properties depend on the shape of the tent. The hemisphere resists the wind well, but has less living space compared to the semi-barrel. Typically, in such tents, the frame consists of two intersecting arcs. The half-barrel has a large interior space. In addition, usually a significant part of such a tent is reserved for a vestibule, which looks very attractive as base stations or for a long stay in nature. Gable and tent geometry are still used, but only in the production of very simple models or large tents (for expedition groups). In such a tent you can gather in a large company. Non-standard models - those in which the frame design can combine several types. For example, half-barrel and hemisphere are used to produce large two-room camping tents. Pole diameter (from 0.0 to 30.0 mm) The size of the poles of the tent. Depending on the required characteristics, the arcs for the frame may have different diameters. Accordingly, the thicker the arcs, the more rigid they are, but at the same time less plastic. Sometimes arcs with different diameters are used. In such tents, the arcs that take on the main load are thicker, and the additional ones (to hold the shape or give greater stability) are somewhat thinner. Number of places (from 1 to 20) The maximum number of people that can simultaneously accommodate in a tent. Number of tambours (from 0 to 4) A tambour is a space separating a room from an exit. Many modern models are equipped with it, but there are also tents without it. The tambour is usually the area between the inner tent (see "Inner tent") and the exit, which may also have a bottom. Small vestibules are used to store things, equipment. Inner tent material The name of the material from which the inner tent is made (see "Inner tent"). Nylon, produced in accordance with certain technologies (weaving, density, etc.), has the necessary strength and breathability. Polyester can also be used for inner tents. It has greater strength and wear resistance than nylon and is highly breathable. Cotton is rarely used in the manufacture of inner tents. This tent can be recommended to those who are allergic to synthetics. Among the advantages can also be noted low weight and low cost. But a tent made of such material must be thoroughly dried before storage, otherwise there is a possibility that the fabric will deteriorate. Bottom material The name of the material used to sew the bottom. Polyester is resistant to most acids and alkalis, to wear and deformation, which allows it to be widely used in the production of tent bottoms. Nylon is also often used in tent bottoms. In the production of materials, various materials processing technologies are often used. For example, Nylon Taffeta PU has a polyurethane treatment that allows it to withstand a water column pressure of 6000 mm (see photo). "Water resistance of the bottom"). Reinforced polyethylene is mainly used for the production of the bottom of budget tents. Polyethylene has a higher specific gravity and is therefore used in the main production of camping tents (see "Intended Use"). Tarpaulin is also a good material for the bottom of tents. has a high margin of safety. PVC excludes thread connection, is a good refractory, moisture and wear-resistant material, therefore it is also often used in the manufacture of tents. Tarpaulin material The material used to make the tarpaulin of the tent. Polyester does not lose its strength when wet, tolerates ultraviolet radiation and sunlight well, and has high heat resistance. Tents made of this material have a longer service life compared to tents made of nylon. Nylon loses about 10-15% of its strength when wet, is more sensitive to UV radiation and sunlight - strength decreases over time. This material has less resistance to chemicals than polyester. Membrane fabric has two seemingly incompatible qualities: it "breathes" and at the same time has water-repellent properties. These properties are imparted to the material either by impregnation, which is applied to the fabric during production with high-temperature technology, or by the thinnest film that is glued or welded to the fabric. The combination of fabric + silicone gives tents made from this material significant advantages. Such tents have a high degree of UV resistance, which is a significant plus when used in the highlands. In addition, silicone-coated fabric is 2-3 times more durable than non-silicone coated fabrics. Subject to the rules of operation, the tent, the awning of which has a double-sided silicone coating, can last more than 10 years. Conventional tarpaulin is currently used quite rarely. The tarpaulin is heavy, but inexpensive. More often in production, tarpaulin is used as a solid base with additional coatings that improve its properties. Canopy The presence of a canopy in the design of the tent. In many camping tents, the rectangular part of the awning plays the role of a door, which can be unfastened and put on pegs, thus arranging an awning. Appointment Tourist tents according to their purpose can be classified into models for high mountains, middle mountains and plains. Tents for the highlands are considered extreme, and tents for the middle mountains and plains are divided into camping and trekking. Separately, you can select tents for fishing. Extreme tents are designed for mountain climbing and expeditions. The design of such a tent should be as rigid as possible in order to withstand the harsh conditions of the highlands (wind, snow). There are extreme tents for "Himalayan" and "Alpine" climbing styles. The Himalayan style involves the creation of several bases during the ascent, while in the Alpine style, stationary bases are not set up, and tents are carried with them. Camping tents are the most comfortable. They are intended for picnics, children's camps, campsites. Such models are often equipped with mosquito nets, adjustable ventilation holes, in addition, they may have several rooms, entrances, vestibules. Trekking tents are designed for hiking or cycling, where weight plays a significant role. Such tents must have high reliability and rigidity, because often such trips last for weeks. Fishing tents, as a rule, are not intended for overnight stays. In it you can hide from bad weather, relax. Typically, fishing tents are compact and light in weight. Frame Type The type of frame provided by the tent design. A tent with an outer frame is more convenient to put up, and at the same time, the inner tent does not get wet, since the awning is put up first. The inner frame design is more difficult to set up, but allows you to set up an inner tent without an awning (outer tent). Tents in which there is no frame are stretched on two posts or on natural supports (trees, etc.). Storm braces Availability of special braces. Due to the larger number (compared to conventional tents) and a specific fastening scheme, such guys provide a high level of frame rigidity, which is necessary during stormy winds.

The Campack Tent Camp is the best choice for a big group outing. The dimensions of the tent allow you to safely move inside in full growth. Despite the large size of the tent, you can easily set it up in almost any terrain. The tent has two opposite entrances, which provides excellent ventilation. This is facilitated by additional windows on the side surfaces of the awning, which are also protected by a mosquito net and external curtains. At the main entrance there are two transparent windows that let in light. High Quality carcass is made of fiberglass and steel structures that do not contain bending elements. Due to this, the tent has acquired even greater reliability. and sustainability. Taped seams guarantee tightness and reliability in any situation. 11 mm fiberglass frame, 16 mm steel. The material of the floor is reinforced polyethylene (tarpauling). Height-190 Quantity of places-5 Processing of seams-glued seams. External material - P.Taffeta 190T PU 3000 mm. Material internal-P.Taffeta 170T. The fabric is made of polyester in the type - camping all sizes - outer tent 465(L)x300(W)x190(H) cm, inner tent 215(L)x280(W)x180(H) cm.

The camping tent Campack Tent Camp Voyager 4 is the best choice for a large company going out into the countryside. The dimensions of the tent allow you to safely move inside in full growth. Despite the large size of the tent, you can easily set it up in almost any terrain. The Campack Tent Camp Voyager 4 has two opposite entrances for excellent ventilation. This is also facilitated by additional windows on the side surfaces of the awning, which are also protected by mosquito nets and external curtains. At the main entrance of the Campack Tent Camp Voyager 4, there are two transparent windows that let in light. The frame is made of fiberglass and steel structures that do not contain bending elements. Due to this, the tent has acquired even greater reliability. Taped seams guarantee tightness and reliability in any situation. 9.5 mm fiberglass frame. The material of the floor is reinforced polyethylene (tarpauling). Height-160 Quantity of places-4 Processing of seams-glued seams. External material - P.Taffeta 190T PU 3000 mm. Material internal-P.Taffeta 170T. The fabric is made of polyester in the type - camping all sizes - outer tent 420(L)x250(W)x165(H) cm, inner tent 210(L)x240(W)x160(H) cm.

Weight: 5.64 kg. Water resistance: 3000 mm. vd. Art. All dimensions: 245 * 420 cm. Height: 145 cm. Warranty: 6 months. Frame: fiberglass. Inner material: 170T P. Taffeta + MESH Floor material: reinforced polyethylene (tarpauling). Outer material: 190T P. Taffeta PU 3000 mm Model: Breeze Explorer 4. Seam treatment: taped. packing weight kg: 6 kg packing dimensions cm: 60*23*20 Modern tent Campack Tent Breeze Explorer 4 is suitable for simple trips and family outdoor recreation. The design allows you to use it both in spring and autumn. Differs in the increased sizes and functionality. The Campack Tent Breeze Explorer 4 is especially convenient for lovers of comfort (has an increased height) and bulky luggage, which is easy to place in a vestibule with an area of ~ 3.5 m2. The high-strength bottom is made of reinforced polyethylene, does not allow moisture to pass through and is resistant to abrasion. The frame made of fiberglass provides strength and stability. The Campack Tent Breeze Explorer 3 features oversized ventilation windows, an anti-slanting rain flap and a double layered door with colored zippers. The modified fastening of the third arc, greatly facilitates the installation of the tent. Inside the tent there is a pendant for a lantern and pockets for storing small items. The Breeze Explorer model has three separate entrances. The main entrance is reliably protected by side awning "wings", which prevent cold air from blowing in during strong gusts of wind. Taped seams guarantee tightness and reliability in any situation. General characteristics Purpose: trekking Inner tent: yes Number of seats: 4 Frame type: inner Geometry: hemisphere Design Number of entrances / rooms: 3 / 1 Number of vestibules: 2 Ventilation windows: yes Windows: no Inner pockets: no Storm guy lines: yes Protection Water resistance awning / bottom: 3000 / 10000 mm w.st. Seam sealing: taped Wind / snow skirt: no Mosquito net: yes UV protection: no Materials Tarpaulin material: polyester (Taffeta 190T PU) Bottom material: polyethylene (Tarpaulin 10x10) Inner tent material: polyester (Taffeta 170T) Pole material: fiberglass Pole diameter: 8.5 mm / 9.5 mm Dimensions and weight External tent dimensions (LxWxH): 420x245x145 cm Inner tent dimensions (LxWxH): 200x240x140 cm Weight: 5.64 kg Terminology: Ventilation windows Ventilation holes in the tent structure. They allow you to remove moisture from the tent, to regulate the flow of fresh air. Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents designed for one or two travelers. Camping tents are the heaviest, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. These tents can accommodate up to 20 people (for details, see "Number of seats"). Windproof/snowproof skirt The presence of a protective skirt along the bottom edge of the tent. The skirt is a strip of fabric around the perimeter of the tent, which is adjacent directly to the ground. It can be either sewn or removable. The presence of a skirt is essential when using tents in the mountains, in winter or just at low temperatures. The skirt will not allow snow or rain to penetrate into the cracks formed by the edge of the tent and irregularities in the established place. Internal pockets The presence of internal pockets will allow you to organize the space inside the tent. Inner tent The presence of an inner tent, which in some cases can be installed separately from the awning. Models with an inner tent are usually called two-layer. The outer layer (awning) is waterproof and strong, protects from rain, and the inner layer is breathable and very light. Single-layer tents are lightweight and have a small volume when assembled. Their disadvantage is that condensate accumulates on the walls of the tent, while in two-layer drops they will roll down without penetrating into the living space. Water resistance of the tent (from 300 to 20000 mm w.st.) The maximum height of the water column that the tent awning can withstand. This parameter determines the water resistance of the material from which the tent is made. For areas with rare rains, tents with a water resistance rating of 500 - 3000 mm of water column are suitable. If the probability of rain is high, showers are possible, then it is advisable to choose tents with an awning water resistance of more than 3000 mm in. Art. The value of this parameter can sometimes reach up to 10,000 mm in. Art. Among the disadvantages of fabrics with high water resistance, one can note a relatively greater weight and high cost. Geometry Some of its properties depend on the shape of the tent. The hemisphere resists the wind well, but has less living space compared to the semi-barrel. Typically, in such tents, the frame consists of two intersecting arcs. The half-barrel has a large interior space. In addition, usually a significant part of such a tent is reserved for a vestibule, which looks very attractive as base stations or for a long stay in nature. Gable and tent geometry are still used, but only in the production of very simple models or large tents (for expedition groups). In such a tent you can gather in a large company. Non-standard models - those in which the frame design can combine several types. For example, half-barrel and hemisphere are used to produce large two-room camping tents. Seam sealing Method for sealing the seams of a tent. Taped seams protect the tent from water leakage. Welded seams are very reliable and durable, as they are welded with a special tape. In addition, there are tents that do not have seam sealing. Basically, these are models of the lowest category. But there are also professional tents that don't need to be sealed simply because they will stand above the rain level (above the clouds). Pole diameter (from 0.0 to 30.0 mm) The size of the poles of the tent. Depending on the required characteristics, the arcs for the frame may have different diameters. Accordingly, the thicker the arcs, the more rigid they are, but at the same time less plastic. Sometimes arcs with different diameters are used. In such tents, the arcs that take on the main load are thicker, and the additional ones (to hold the shape or give greater stability) are somewhat thinner. Number of places (from 1 to 20) The maximum number of people that can simultaneously accommodate in a tent. Number of tambours (from 0 to 4) A tambour is a space separating a room from an exit. Many modern models are equipped with it, but there are also tents without it. The tambour is usually the area between the inner tent (see "Inner tent") and the exit, which may also have a bottom. Small vestibules are used to store things, equipment. Inner tent material The name of the material from which the inner tent is made (see "Inner tent"). Nylon, produced in accordance with certain technologies (weaving, density, etc.), has the necessary strength and breathability. Polyester can also be used for inner tents. It has greater strength and wear resistance than nylon and is highly breathable. Cotton is rarely used in the manufacture of inner tents. This tent can be recommended to those who are allergic to synthetics. Among the advantages can also be noted low weight and low cost. But a tent made of such material must be thoroughly dried before storage, otherwise there is a possibility that the fabric will deteriorate. Bottom material The name of the material used to sew the bottom. Polyester is resistant to most acids and alkalis, to wear and deformation, which allows it to be widely used in the production of tent bottoms. Nylon is also often used in tent bottoms. In the production of materials, various materials processing technologies are often used. For example, Nylon Taffeta PU has a polyurethane treatment that allows it to withstand a water column pressure of 6000 mm (see "Water resistance of the bottom"). Reinforced polyethylene is mainly used for the production of the bottom of budget tents. Polyethylene has a higher specific gravity and is therefore used in the main production of camping tents (see "Intended Use"). Tarpaulin is also a good material for the bottom of tents. has a high margin of safety. PVC excludes thread connection, is a good refractory, moisture and wear-resistant material, therefore it is also often used in the manufacture of tents. Tarpaulin material The material used to make the tarpaulin of the tent. Polyester does not lose its strength when wet, tolerates ultraviolet radiation and sunlight well, and has high heat resistance. Tents made of this material have a longer service life compared to tents made of nylon. Nylon loses about 10-15% of its strength when wet, is more sensitive to UV radiation and sunlight - strength decreases over time. This material has less resistance to chemicals than polyester. Membrane fabric has two seemingly incompatible qualities: it "breathes" and at the same time has water-repellent properties. These properties are imparted to the material either by impregnation, which is applied to the fabric during production with high-temperature technology, or by the thinnest film that is glued or welded to the fabric. The combination of fabric + silicone gives tents made from this material significant advantages. Such tents have a high degree of UV resistance, which is a significant plus when used in the highlands. In addition, silicone-coated fabric is 2-3 times more durable than non-silicone coated fabrics. Subject to the rules of operation, the tent, the awning of which has a double-sided silicone coating, can last more than 10 years. Conventional tarpaulin is currently used quite rarely. The tarpaulin is heavy, but inexpensive. More often in production, tarpaulin is used as a solid base with additional coatings that improve its properties. Appointment Tourist tents according to their purpose can be classified into models for high mountains, middle mountains and plains. Tents for the highlands are considered extreme, and tents for the middle mountains and plains are divided into camping and trekking. Separately, you can select tents for fishing. Extreme tents are designed for mountain climbing and expeditions. The design of such a tent should be as rigid as possible in order to withstand the harsh conditions of the highlands (wind, snow). There are extreme tents for "Himalayan" and "Alpine" climbing styles. The Himalayan style involves the creation of several bases during the ascent, while in the Alpine style, stationary bases are not set up, and tents are carried with them. Camping tents are the most comfortable. They are intended for picnics, children's camps, campsites. Such models are often equipped with mosquito nets, adjustable ventilation holes, in addition, they may have several rooms, entrances, vestibules. Trekking tents are designed for hiking or cycling, where weight plays a significant role. Such tents must have high reliability and rigidity, because often such trips last for weeks. Fishing tents, as a rule, are not intended for overnight stays. In it you can hide from bad weather, relax. Typically, fishing tents are compact and light in weight. Volume (from 0.8 to 4322.0 m³) The volume of the internal space of the tent. Frame Type The type of frame provided by the tent design. A tent with an outer frame is more convenient to put up, and at the same time, the inner tent does not get wet, since the awning is put up first. The inner frame design is more difficult to set up, but allows you to set up an inner tent without an awning (outer tent). Tents in which there is no frame are stretched on two posts or on natural supports (trees, etc.). Storm braces Availability of special braces. Due to the larger number (compared to conventional tents) and a specific fastening scheme, such guys provide a high level of frame rigidity, which is necessary during stormy winds.