How to sew a tent with your own hands: standard, winter and children's. DIY tent for comfortable fishing DIY fishing tent

Every lover of outdoor recreation is required to have at least one good tent. But what if there are no good options in stores or they are very expensive? In this case, you can read the information on how to sew a tent with your own hands. Knowing all the nuances, you can make a really high-quality design that will not let you down even in bad weather.

It is quite possible to sew a tent yourself, but you need to understand what requirements it must meet. First of all, it should be:

Reliable, and can withstand not only long-term use, but also a wide variety of external factors: from wind to rain;
Comfortable. Its size should be based on the number of people who will be in it. The growth of people is also important;
Not heavy. This is important, especially if it’s not just fishing, which you can go on by car, but a real hike.

Based on the above criteria, the materials for the construction must be dense and waterproof. And it’s absolutely great if they are also light. Examples include:

Thin tarpaulin;
Raincoat;
Percale;
Rubberized percale;
Bologna;
Special tent fabric. This is the most ideal option.

The amount of material directly depends on the shape of the future tent, but the difference is not very big. For example, a standard three-pitched structure for 4 people requires on average 2-3 square meters less than a gable or single-pitched form.

Additional materials will also depend on the type of tent. The minimum kit includes:

Strong ropes;
Tape for processing seams;
Bedding made of waterproof material;
Needles and threads.

As you can see, the set is quite simple and very affordable. You can find everything you need at your nearest hardware or hardware store.

How to sew a waterproof tent with your own hands

Waterproofness is a very important criterion on which the comfort of staying in a tent will depend. You can immediately buy tent fabric that is initially impregnated with a water-repellent agent. But there are a number of measures that can make even ordinary fabric, such as tarpaulin, waterproof. Here are some examples:

Place the fabric in a solution of 40-50% laundry soap until completely saturated. After this, transfer it to a solution of copper sulfate 20%. After a few minutes, the material must be removed and dried thoroughly;
In 4 liters of warm water put 0.5 kg of soap, 450 g of rosin and 25 g of baking soda. The material is placed in the resulting mixture for about 2 hours. After time has passed, it is taken out and dried;
Combine water and alum in a ratio of 10 to 4. Add 2 parts of fish glue to the mixture, as well as 1 part of laundry soap. Wring out the fabric soaked in the solution well and rinse using a solution of lead acetate at a concentration of 4%.

All of these methods require the use of protective gloves and care. But the simplest method can be considered the use of ordinary film, which, if necessary, can be used to cover the tent and secure it with clothespins.

A simple version of the tent can be made using the following pattern.

The dimensions in the diagram are indicated in centimeters and are calculated for a base perimeter of 150*180 cm. If necessary, they can always be increased while maintaining the overall proportions.

For such a tent you will need at least one riser. You can use a regular ski for this. But if there is a pair available at once, then even better. In this case, it is better to make the riser in the shape of the letter Λ. This is very convenient, especially in poor visibility conditions. The back wall is fixed with braces, which are carried out from the highest point in the diagram. If the area is wooded and it is possible to install the structure between two large trees, then you don’t even need to use a riser.

The main steps for sewing a tent consist of the following procedures:

Sewing a stretcher using a nylon rope between points A and FG;
Sewing a stretch to points B and C;
On the outside, loops are installed at the corners of the base, with which the tent will be attached to pegs. Nylon rope is also suitable for this purpose;
If desired, you can sew a zipper between the sashes.
Preparing the base of the structure. To do this, it is necessary to cut a piece of the required size from a durable waterproof, and preferably rubberized, material and sew it with a tarpaulin tent awning.

It is advisable to make holes in the structure for air circulation. The easiest way is to cut the sides of the tent a little and place a holding object between them, for example, an ordinary branch. The edges of the cuts must be trimmed with threads to prevent the fabric from unraveling. The seams can always be reinforced with additional tape. This measure will not only protect the tent from tearing the seams, but also from moisture getting through them.

DIY winter fishing tent

A tent for winter fishing, in addition to the basic requirements, must additionally protect its owner from low temperatures and increased precipitation.

To make a winter tent with your own hands, you can use old skis and an unnecessary cot. Be sure to have suitable fabric for the tent and tube. You can also use ski poles instead. Below is a diagram of a simple single-seat design.

Since the basis of such a tent is skis, you can use this moment to your advantage, for example, moving the structure along the ice from one hole to another.

The manufacturing process is as follows:

The tubes, which will serve as the horizontal upper crossbar, are connected to ski poles, which will serve as vertical posts. For this, tees of suitable diameters are used;
After this, the second end of the vertical poles is secured to the skis. A metal plate and a T-shaped tongue attached to the skis will help you do this;
From an unnecessary folding bed, you need to remove two tubes bent at the ends. They will connect the finished frame to the fishing box. To do this, they must have a latch at one end, and a docking unit at the other;
The box with tubes is connected using a copper spring;
The awning is secured with ropes. To do this, holes are made in the lower part of the material or a special ready-made metal strip is used. The staples are inserted into the holes and secured to the skis.

In windy conditions the tent may not be stable. To do this, it is necessary to equip it with weights.

Umbrella

“Umbrella” tent design

This is the simplest type of tent and is very easy to set up. This is facilitated by its umbrella design. The main frame is made of duralumin tubes or twigs. They have the required level of rigidity. The top is covered with a tarpaulin or other synthetic fabric. The disadvantage of this type is the low level of vapor permeability.

Frame on arches

It is not very popular among fishermen because it does not have high reliability and stability. Its structure is very simple: it is based on several arc frames, which are made of fiberglass or duralumin. The second option is more durable. Due to this, the shape of the tent can be different. An awning is pulled over the frame from above.

Automatic tent

The basis of this type is a frame made of thin metal rods. They should be flexible enough to allow the tent to be folded compactly. This is the meaning of the name “Automatic”: when the tent is removed from the cover, due to the spring state of the frame, it independently takes the desired shape. The installation procedure usually does not take more than 20-30 seconds.

The disadvantages of this type are the inconvenience of folding the structure, its instability and low resistance to external influences. Therefore, it is best to use it for one-day fishing trips.

DIY children's tent

In order to sew a children's play tent you will need 4 tall wooden blocks, a piece of fabric, a drill, a crossbar and elastic bands. 4 bars act as the base, 2 on each side. Crossing them, a hole is made at the intersection using a drill. A crossbar is installed in the holes, which will connect the two sides.

A small piece of elastic folded in half is sewn onto each corner of the fabric. All that remains is to stretch the finished fabric onto a wooden frame. The tent is ready.

DIY winter fishing tent. How to make a tent with your own hands! A comfortable and spacious tent is one of the most important attributes for winter fishing. You simply cannot do without it. Often, fishermen have to spend hours in severe frost and wind waiting for a bite. It’s good if there is a tent nearby in which you can periodically warm up. But what about those who cannot purchase it? After all, this pleasure is not cheap. Today we will tell you how to make a tent with your own hands. This process does not require special skills or knowledge. Types of winter fishing tents First, you must decide on a suitable design. Let's list the main types of tents: Umbrella. For the manufacture of the frame, duralumin rods or tubes are used. The finished structure has rigidity and increased strength. Any synthetic fabric is suitable as an awning. They are often used in combination with tarpaulins. Automatic tent. This option is not as common as the previous one. A distinctive feature of the design is that the tent is sewn to an elastic frame and then folded into a circle. Frame on arches. This model consists of 2-3 arcs made of fiberglass or duralumin. The structure quickly unfolds in place. An awning is pulled over it. What shape can a tent for winter fishing have? Cube, triangle, trapezoid and so on. The choice is yours. What requirements should a homemade tent for winter fishing meet? First things first. The main function of a tent is to protect a person from adverse weather conditions (wet snow, strong wind). It also increases the comfort of fishing. While under the tent, you can prepare food and tea, as well as warm up using special heating devices. Of course, there are a variety of winter fishing tents on sale. The photos attached to this article prove to us that homemade designs turn out no worse than store-bought ones. So, let's get down to business. What should you pay special attention to when sewing such an important attribute? A do-it-yourself winter fishing tent must meet the following requirements: 1. Have a lightweight, compact and mobile design. This is understandable. Some fishermen would prefer to freeze for a few hours rather than carry an extra load. 2. Quick to unfold and easy to install. 3. It is advisable that a do-it-yourself winter fishing tent be made of thick tarpaulin or waterproof fabric. 4. A truly durable frame is made from aluminum and composite materials. But it is not recommended to use plastic. 5. The inside of the tent should remain warm. It would be nice to achieve this without heating devices (portable, gas and others). But this is a utopia... What materials and tools will you need? A DIY winter fishing tent is an excellent solution that will allow you to save a lot of money. We propose to assemble a fairly simple design. We are talking about a tent based on a standard box, which can be purchased at a fishing store. We will also need: one pair each of children's (very small) and school skis (up to 160 cm long); several duralumin tubes (you can remove them from ski poles); old cot; waterproof fabric (will be used as an awning). Do-it-yourself winter fishing tent: instructions All necessary materials and tools are prepared. Now you can move on to the practical part: 1. Take aluminum ski poles. From these we will make vertical frame tubes. As for the horizontal tubes, they should be a little thinner. The upper connections of the ribs of the future tent are made in the form of tees that end in cylinders (length 5 cm). It is very important that the diameter of the cylinders is the same as that of the tubes being connected. 2. We begin to secure the lower ends of the vertical tubes to the skis. The main role here is played by the shaped lock. At the lower end of the tube we find a T-shaped tongue, and then carefully insert it into the metal plate attached to the ski. All that remains is to rotate the tube 90 degrees. 3. To connect the tent frame with the box, we use 2 duralumin tubes from an old folding bed bent at the ends. The end of the connecting product must be secured to the end of the bent tube. At its other end we install a latch, which, during docking, with its tongue will fall exactly into the hole on the second bent tube. 4. The box will be connected to the above mentioned tubes using round lugs located on the ski racks. They can be made from copper or steel strip and then attached to the posts. 5. Now you need to pull the awning. We install metal plates with slots on the lower edge of the material. It is through these slots that the U-shaped brackets driven into the side ends of the skis will pass. We fix the connections using shoe laces. In order for the tent to hold well on ice, you need to equip it with anchors (2 pieces). Each such anchor is a penknife with two blades at the ends. Assembling the tent on site Making a winter tent is only half the battle. It must be assembled and installed correctly. The algorithm of actions is as follows: 1. We connect the halves of the bent tubes with the skis. The tongues should fit into the slots of the plates. The tubes are located along the axis of the skis and then rotated 90 degrees. 2. We thread the ends of each pair of tubes through the eyes on the ski racks. 3. Connect all 4 skis. The locking tab of the bent tubes should snap into place. 4. Let's start installing the box. 5. We install 4 vertical posts at the ends of the skis. 6. Now you need to install tees on the ends of the tubes, and then connect them to the roof tubes. 7. Align the holes of the tubes and tees. The installation wires will pass through them. 8. We stretch the awning onto the frame. We thread carabiners and plates through the brackets and tongues on the skis. We fix the connections with laces. 9. At the end of the process, we attach anchors and install them in pre-prepared holes. Conclusion Now you know how to make a tent with your own hands, what materials and tools are required for this. By following the recommendations and instructions described above, you can create a stable and reliable structure.

SHOW

COLLAPSE

Many anglers who are interested in winter fishing are interested in the question of how to make a good tent with their own hands. In this article we will talk about why this accessory is needed, consider possible designs and alternative options.

Purpose

The main purpose of the tent is to protect the fisherman from the adverse effects of the environment. In our case it is snow, wind and cold.

Thick snow clogs the hole, makes it difficult to register a bite and covers everything around. And if you add wind and cold to this, then fishing turns from pleasure into torture. Another function is protection from onlookers. As strange as it may sound, if you fish in a body of water with great fishing pressure, then the presence of such a protective tent will be very important even in mild weather. In addition to annoying interlocutors, you will also get rid of unwanted neighbors. During the absence of a bite, many fishermen actively monitor the reservoir for the presence of fish from their colleagues. During such periods, small fishing towns may gather around more successful anglers. A tent can not only protect you from the elements, but also from other anglers if that's what you want.

Constructions

There are many design options. Which one is better to use depends on how often you change your fishing location. If you intend to sit in one place all the time, then camping tents with tension lines are quite suitable for you. For running fishing, you need structures that are quickly assembled and light in weight.

Stationary

To make such a shelter with your own hands, you need to install a frame and pull an awning over it. As a frame, you can use a collapsible structure of various layouts. The awning is fixed both on the posts themselves and with pegs driven into the ice. You can sew it with your own hands from a tarpaulin or other dense material that is not blown or wet. The awning needs to be made a little larger than required. The lower edge of the awning should lie on the ice (about 15-25 centimeters). This area is covered with snow, which prevents the tent from blowing from below. This shelter is used primarily for night fishing, which involves fishing in one place.

Easy to install

Tents of this type are an awning into which spring steel rods are sewn. These rods hold the tent open. The arrangement of the rods can provide a hemispherical, cubic or triangular shape. The latter is the easiest to make, but it has the smallest internal volume, which can cause inconvenience when fishing.

It is better to sew an awning with your own hands from nylon or nylon. Tarpaulin is no longer suitable here, since it has a lot of weight. This tent is quick to set up and easy to transport.

Based on a sled

A sled is an indispensable item for winter fishing. They can also be used as a tent base. On the sled, you can mount a rectangular frame made of aluminum or plastic pipes, on which the awning will be placed. For convenience, the frame can be made collapsible. This shelter can be transported assembled.

A more complex option is a fan-type folding design. This mechanism is also used in strollers for a lowered canopy. In this case, the awning is attached to a set of U-shaped pipes. A folding frame based on a sled is an excellent option for fishermen who actively move around a pond in search of prey. Installing such a tent with your own hands will take no more than 20 seconds.

Panel house

If you are a car owner and love comfort when fishing, you can make your own shelter from sheets of plywood or chipboard. But it will be more like a fishing house. You will need 6 sheets of pre-cut holes for the windows, doors and holes. You can make sandwich panels, which consist of two sheets of plywood and an insulator. Such panels have good thermal insulation properties, and their use in your house will provide comfort to its inhabitants.

Alternatives

Oilcloth

If you don’t have a tent, then you can use the most ordinary oilcloth. In this case, the fisherman himself serves as the frame. It should be said that this this option is not suitable for those who like very active hooking, because with such movements the oilcloth will fly off. As a stand, you can use an ice ax or an ice pick stuck into the ice. The lower edge of the oilcloth must be folded inward and secured with available items.

You can also sew a large bag from oilcloth with your own hands, which is put on the fisherman.

Such a shelter greatly restricts the angler’s movements and is not suitable for fishing with a balance beam.

The advantages include minimal cost and very fast installation. This is an excellent option for winter fishing enthusiasts who do not sit still and do not want to spend money on purchasing or making a more expensive shelter.

Tourist

If you have a camping tent, it can also be used for winter fishing. It would be very good if it had a bottom. To use such a shelter for winter fishing, it is necessary to modernize it - make a U-shaped cutout at the bottom, through which access to the holes will open. We also recommend sewing a zipper there. Tourist tents are less expensive than specialized fishing tents, and they can also be used for outdoor recreation.

If you plan to fish at night, then feel free to install a stationary shelter, but before that, inspect the ice for the presence of gullies, which may reach your site by morning. For lovers of fishing with a balance beam, a fan-type design, made with your own hands on the basis of a sled, is perfect. If you don’t want to spend extra money, an oilcloth bag is just for you.

During winter fishing, the angler needs to protect himself from many weather conditions that are acceptable in winter, and for this, a winter fishing tent is very suitable.

In addition, it increases the time the fisherman stays in cold weather. If you use heating devices in the tent, then the air in it can be heated to 20 degrees and you can freely stay in it without outer clothing.

Types of winter fishing tents

Winter tents are divided into types, which determine their design, installation and assembly.

Umbrella. This type is considered the simplest in its design. It has an umbrella design, making it easy to install and assemble. To make the frame, duralumin rods are used, which increase the reliability and strength of the tent. The awning can be made of synthetic fabrics or a combination with tarpaulin.
Machine. The scheme of their construction is that a tent is sewn to the frame. When assembling, it is enough to twist it into a circle, and it unfolds instantly due to the action of the frame, which works like a spring. Such tents are becoming increasingly popular among fishermen because they have a low price and light weight. But along with this, it has many disadvantages: poor resistance to wind, the frame easily breaks if the tent is not set up correctly.
Frame. Its design resembles the usual summer version. It folds out of several folding arches and an awning. She sorts it out in about 10 minutes, or even more. The tent is not particularly reliable. It is rare for fishermen to purchase this type of winter tent.

What requirements must a homemade tent for winter fishing meet?

A winter tent should create the most favorable conditions on cold, windy, winter days. In addition, it should serve as a place where you can cook a meal, drink hot tea and just warm up.

Nowadays the market is full of all possible types of tents, but it is still nice to make one yourself. If you are sewing a tent yourself, you must meet certain requirements:

It should be light and compact.
Since it is portable, the tent must be mobile.
Select fabrics that are dense.
It should be assembled and unpacked conveniently and quickly.
When making it, it is better to give preference to stronger and more reliable materials. The heat in the middle of the structure should be maintained for as long as possible.

What materials and tools will you need?

A very common homemade winter fishing tent is a design based on a fishing box. It can be bought at any store that specializes in selling fishing gear. In addition, you will also need some accessories:

Skis, two pairs (children's and school version)
Tubes, you can use ski poles.
An old folding bed.
Thick fabric, tarpaulin is best.

At first glance, it is not entirely clear what this design will look like. But, in practice, its effectiveness and ease of use have been proven. After completing the design, you should end up with a box that can be transported using skis. In addition, it is easy to assemble and move even on ice.

Drawings of a homemade winter tent

As you can see from the diagram, the tent is mounted on skis and this makes it easier to secure it on the ice. After all, mounting regular winter tents requires a lot of time and effort. And with such a design, the fisherman can move around the reservoir many times. Wherever a new hole is made, the angler drags it towards him and, having climbed inside, is ready for fishing in warmth and comfort.

Note! To reduce windage and make it easier to drag the tent in strong winds, you need to remove the awning from the tent. If you don’t do this, it will simply be difficult to drag it.

Step-by-step instruction

This design is very old, but very reliable. More than one generation of fishermen have tested it in practice.

How to make a tent with your own hands photo and pattern

Ski poles will serve as a frame, where they are installed vertically. Horizontal tubes should be an order of magnitude thinner. The upper nodes must be made in the form of a triple connecting adapter and its end is made like a cylinder. It is worth noting that the diameters of the cylinder and the tubes with which they are connected must match.
Next, the tubes are secured in a vertical position to the skis. A T-shaped tongue is inserted into a metal plate attached to the ski, which is located at the lower end of the tube. After this, the tube is rotated 90 degrees.
Two tubes taken from a folding bed serve to connect the frame to the box. The end of the connecting product is secured to the end of the bent tube. The latch is installed at the other end of the tube.
Eyelets made from copper strip will serve to connect the box with the tubes.
At the end of all the work, all that remains is to pull the awning. Metal plates with slots are installed in its lower part. You need to insert staples into these slots, which are driven into the side ends of the skis. The connections are secured with laces. In order for the structure to remain stable on a frozen body of water, it must be equipped with two anchors.

Homemade tent pegs and screws

In order to make pegs that will be used for a winter tent, you need to take long and strong screws. The peg has a hook-shaped top. This process is performed using pliers. Screws are made of metal tubes that have threads. If you don’t have one, then self-tapping screws will do just fine.

How to sew a tent with your own hands in the form of a house

You can consider another very popular type of tents, which are made in the form of a house. To make such a tent yourself you will need:

Fabric that does not get wet - 14 sq. m.
Metal washers – diameter 1.5 mm (up to 20 pcs.)
Braided rope – 15 meters.
Not a wide tape - 9 meters.
Rubberized fabric for bedding - 6 meters.

Having prepared all the materials, you can proceed to making a tent that can accommodate one or two people. To begin, cut out 2 pieces of fabric of the same size - 1.8 by 0.9 meters. A marking of 65 centimeters is made along the long side, and the same operation is performed on the other side. The fabric is cut at the connection points. This creates the entrance and back wall of the tent.

The diagram shows how to complete all other work step by step. The only thing you need to remember is that all the elements are sewn together with high quality. This is where tape will come to the rescue to strengthen the seams.

If regular fabric is used for the tent, then additionally polyethylene will need to be used. Rings are also sewn into the tarp so that the tent can be reinforced.

Assembling the tent on site

Assembling the entire structure takes a little time and effort:

Skis, the tongues of which are inserted into the slots of the plates, are connected to the halves of bent tubes, which should be located along the axis of the ski, and at the same time the ends are turned inside the tent by 90 degrees.
The ends of each pair of bent tubes are threaded through special holes on the ski racks.
The skis are connected to each other to create a rectangular shape.
Then a box is installed on this structure.
At the ends of the skis, four vertical pipes are installed, which serve as racks.
The roof pipes are connected using a tee. Connecting parts are installed at the ends of vertical tubes.
After aligning the holes of the tubes and tees, the installation wires are pulled into them.
A tarpaulin is stretched over the frame and secured with laces.

Disassembly of the structure is carried out in the reverse order. To make the process faster, you can number the parts.

So, despite the fact that there are many different types of fishing winter tents, homemade, time-tested ones have not been canceled. They are easy enough to make yourself. But we must remember that they must meet all the requirements of the fisherman. After all, it becomes a temporary home and shelter from the frost.

When making your own tent, you should carefully design it and select high-quality materials.

DIY winter fishing tent - step by step guide

I thought for a long time about how to keep warm in a single-layer umbrella-type tent; I don’t want to carry a cot with me like some fishermen do. Using a gas stove for heating, it turns out that warm air stands under the dome of the tent, and instantly evaporates through the single-layer fabric, and below, as always, it is cold. Sitting on a fishing box, your feet get cold, and you can’t sleep at night. Due to temperature changes, condensation forms on the walls of the winter tent, and then turns into a crust of ice.

Accordingly, two problems need to be solved:

Close the ice.
Insulate tent fabric

Wandering around a construction store I came across some kind of insulation called “Izolon”. The thickness is 10 mm, and the price per linear meter is quite affordable, so you won’t regret it if nothing comes of your idea.

Its height is 1500 mm, the length was 2 meters, the total result was a piece of 2000 mm by 1500 mm. I laid him on the floor of the tent, that is, on the snow. The cold from the ice stopped. Not the entire perimeter of the tent was closed; the open area was just enough for four holes, two per angler.

This piece was enough for two backpacks (so as not to stand on the snow) and two fishermen. You can sit comfortably, even without shoes, wearing only socks; if you lie down on a jack, you can sleep quite comfortably.

You can roll it into a roll (personally, it’s not convenient for me) or like paper, put the drag on top of the sled and reinforce it with rubber stretchers. Task number one - to cover the ice and snow inside the tent and prevent the entry of cold - has been solved.

Let's move on to solving the second problem - insulating the tent itself around the perimeter, i.e. strengthen the protection of the tent from the wind blowing away heat.

I found an old Soviet rag tent at home, I bought a new one, but I don’t need this one. I laid it out, figured it out, made a couple of cuts, a hole approximately in the center of the roof. It turned out to be a slip-on cover.

The fabric of the Soviet tent is quite thick, it lies with folds, this creates a small layer of air, which is good for retaining heat.

The door of the Soviet tent was combined with the door of the main one.

As a result, the heat inside the tent remains 4-6 times longer, the gas burner, before remaking the tent, worked at maximum flame for about 14 hours, after which the 5-liter cylinder ran out, now the flame is half as much, it’s hot inside, you can sit without shoes in a T-shirt.

Condensation does not form on the walls, the tent is dry. And, what is also important, it is no longer blown by the wind. Tested in cold weather -21°C. It became darker inside, a ceiling light solves the problem.

The cover is rolled up, length 40 cm, thickness 25 cm, weight 1.3 kg.
Task number two - insulating the umbrella tent around the perimeter and increasing wind protection - has been solved.

As they say, “It’s warm, it’s light and the flies won’t bite.”

Reshetnikov Ilya, Nizhny Tagil, Sverdlovsk region, Russian Federation - Especially for Homemade FISH

How to make a floor in a winter tent
Heating a winter tent with candles

Winter fishing is a lot of positive emotions, which can be diluted by some of the negative emotions associated with weather conditions. It is not difficult to imagine the discomfort an angler feels in the presence of frost, and even wind, which increases the feeling of cold. The wind may not be strong, but it can bring a lot of problems. If you have a winter tent for fishing, then some of the problems can be reduced to zero.

The presence of a tent allows you to increase the total time a fisherman spends on a pond in winter. Moreover, you can easily raise the temperature in the tent to above zero, which will allow the fisherman to feel very comfortable.

Depending on the design features, winter tents are divided into specific models.

Umbrella

These are the simplest designs that are easy to assemble and install. To make the frame of such a tent, you should use durable but lightweight materials. Synthetic fabrics or their combinations with tarpaulin are more suitable as an awning for covering.

Machine

The design is designed in such a way that the frame acts as a spring, which takes the desired shape when it is released from the packaging. They are quite popular due to their simplicity of design and lightness. Despite this, these tents have a number of disadvantages. Firstly, they are not resistant to strong winds, and secondly, they are not so easy to fold. Therefore, when going fishing, you will have to practice beforehand. It unfolds itself, but without the skills, it will be very difficult to fold it and if you overdo it, you can break it.

Frame

This tent consists of several folding poles and an awning that covers this frame. We can safely say that this is the same simple option, but it takes a long time to assemble and disassemble. In addition, it is not particularly durable. Therefore, fishermen rarely purchase such a design.

Requirements for a homemade tent for winter fishing

A tent for winter fishing should protect the fisherman from wind, frost and precipitation. Moreover, the tent should have enough space to relax so that you can cook lunch or just drink tea to keep warm.

You can purchase any tent at specialized retail outlets, especially since the assortment is very large. Be that as it may, some fishermen make them themselves, taking into account all the requirements. Besides, who else but the fishermen knows what kind of tent is needed. Moreover, not all factory-made models meet the requirements of winter fishing enthusiasts.

A homemade tent should be:

quite light and compact;
mobile so that you can move easily;
covered with dense but breathable fabric;
easy to install and dismantle;
durable and strong, and also retain heat for a long time.

To work you will have to stock up on these tools

Most tents made by anglers themselves fit into a fishing box. By the way, you can also make a box yourself, which is what many fishermen do, although you can buy it. In addition to the box, you will need the following accessories:

two pairs of skis, one for children, one for school;
tubes. In this case, it could be ski poles;
unnecessary folding bed;
dense fabric, such as tarpaulin.

At first glance, how can you build a tent from such a set of elements? But, nevertheless, such a design proved that it has the right to life. The final product fits into a fishing box, which is very easy to transport on ice. The structure is quickly and easily assembled and just as easily moved on ice in working condition.

The only negative is that there is little space in it. But if you approach the problem constructively, then it is possible to solve it and increase the size of the tent. Paradoxically, it protects from the cold, and this is the main thing.

Drawings of a homemade winter tent

Judging by the drawings, the tent is mounted on skis, which simplifies its installation on ice. Regular tents require special fasteners. In addition, skis allow you to move the entire structure around the pond countless times. As a rule, winter fishing is not limited to one punched hole - there can be ten, or even more, and each hole has to be fished.

The only thing is that it is problematic to use it in the presence of strong wind, since it is mounted on skis, the wind will be able to move it across the pond on its own. In this case, you can get used to it and use the power of the wind to move it. The main thing is to drill the holes correctly.

Step-by-step production

Despite the fact that this design was born a long time ago, many anglers have tested it in harsh winter conditions.

How to make a tent with your own hands

Ski poles act as a frame and are installed vertically. Horizontal tubes should be thinner. At the corners, the frame is connected using tees, the diameter of which must match the diameter of both vertical and horizontal tubes.
The next step is to attach the vertical tubes to the skis. A metal plate is attached to the ski, into which a tongue is inserted in the letter T, attached to the lower end of the tube. To secure the stick, just rotate it at an angle of 90 degrees.
Two sticks are prepared from an old cot that will connect the frame to the box. Take a bent tube, at the end of which there is a docking unit. At the other end of the tube there is a latch, which serves as a fastening element for the docking unit.
A spring is made from a copper strip that connects the box to the tubes.
Finally, all that remains is to pull up the awning. Metal strips with holes are attached to the lower part of the awning. The brackets attached to the ends of the skis are pulled into these holes. The awning is connected to the brackets using ropes. For stable behavior of the tent on ice, it is equipped with two anchors.

How to make fasteners

If the tent is not secured on the ice, then at the slightest movement it will shift in any direction, especially in the presence of wind. Therefore, you need to make special pegs with threads at the end. For this purpose, long and strong self-tapping screws are suitable, the top of which is bent in the form of a hook. By the way, hardware stores sell hooks with threads of any size.

How to sew a tent with your own hands

Alternatively, you can make a tent in the form of a house. To make it you need to take:

Water-repellent fabric with an area of 14 square meters. meters.
Metal washers, 1.5 mm in diameter, 20 pcs.
Braided rope, up to 15 m long.
Narrow ribbon, about 9 m long.
Fabric for bedding, rubberized within 6 m.

Such a tent can accommodate one or even two people. First of all, you need to prepare two pieces of fabric measuring 1.8 x 0.9 m. Marks are made on the 1.8 m side every 65 centimeters. The same is done with the other (0.9 m) side. The fabric should be cut at the joining points to create the entrance and back wall of the tent.

The diagram shows the implementation of further work step by step. Most importantly, all parts must be sewn securely. Use tape to reinforce the seams. There are times when a tent is made from ordinary fabric. In case of bad weather, polyethylene film is used, which can protect against wind and precipitation. Metal rings are sewn into the fabric for fastening. As a rule, they are located at the bottom of the awning, as well as in the places where the fabric is attached to the frame.

Setting up a tent on a pond

Assembling a homemade tent on skis takes a minimum of useful time:

The skis on which the tongues are attached are connected to the halves of the tubes located parallel to the skis. They should be pointing inside the tent.
Each pair of bent tubes is threaded through special holes located on the ski racks.
The skis are connected to each other to form a rectangle.
A fishing box is installed on the structure prepared in this way.
Vertical posts are installed at the ends of each ski. There should be four of them.
Tees are taken and with the help of them a roof is formed. They are installed on each vertical post.
Using horizontal tubes, the frame is finally formed.
Fabric is thrown over the frame, which is attached to the frame using short ropes.

A similar tent is disassembled in the reverse order. If each structural element is numbered, the process of assembly and disassembly will take slightly less precious time.

Naturally, a tent can be purchased in a store, but not every winter fishing enthusiast is ready to purchase one, due to the lack of extra funds. It is much cheaper and easier to make it yourself.

The arrival of winter, with its sub-zero temperatures, piercing winds and prickly drifting snow, does not mean that going out into nature should be postponed until next summer. Of course, most people prefer to sit peacefully in warm apartments, but there are those who are not at all afraid of -20 on the thermometer. They prepare winter fishing equipment, select warm clothes and shoes, and apply maximum ingenuity in such matters as insulating a tent. This completely solvable problem should be considered based on their experience.

Correct location

Tent location in winter

Any more or less experienced fisherman will tell you that putting up a tent on a pond in a place convenient for you, where the shore or trees can protect from the wind, is not fishing - it’s just a camping trip. The fish gather in places that are convenient for them. She, of course, takes into account climatic and relief features, but they are often radically different from our preferences. Therefore, lovers of winter fishing have developed some rules for installing a tent, which can be applied under other conditions.

The main source of cold in open space is not frost, but wind. You can protect yourself from the cold with quality clothing. It is much more difficult to hide from the wind. That is why the tent should be installed so that the entrance is on the leeward side, and to prevent blowing, it is recommended to sprinkle the lower perimeter with snow.

Insulation methods

Insulating a winter tent with polyethylene

There can be several ways to insulate a tent with your own hands. Some of them can be used in combination, some exclude the rest. You can only choose after trying several times, but we will try to carefully consider the most popular ones to make your choice easier.

Insulating a winter tent with polyethylene. The most affordable way to help protect yourself from rain and snow. However, he cannot save for long. Condensation will accumulate on the inside, and the material itself is quite light and it will be necessary to carefully secure it, at least with clothespins, and this will greatly increase the installation time of the tent.
Double tent. Or an additional awning, which can be easily made from an old tent or a special cover can be sewn, for example from tarpaulin. This method is much more effective than polyethylene insulation, but requires additional preparation at home.
Internal insulation. In specialized stores you can find a wide selection of isothermal insulation based on padding polyester, silicone and the like. They are covered with double-sided breathable fabric and provide excellent protection from moisture. Their cost, of course, is quite decent, but they also provide a solid guarantee of heat. There is also a more budget option: a heat reflector on foil, secured to the inner walls with clamps. You will have to tinker with it in the cold, but the heat from the heater will linger inside the tent much longer.
Insulated floors. The main source of cold inside the tent is frozen ground, snow or ice if you are fishing. The simplest solution to cutting off this source is to use travel rugs. They are made of a special porous material and are intended specifically for this purpose. But it should be borne in mind that after some time they will begin to transmit heat downwards, which can lead to the melting of ice or snow and the formation of an elementary puddle right in the middle of the tent.

The listed methods, individually or in combination, will help keep the tent warm for a while and are used everywhere, especially if you are planning to be in nature for only a few hours. However, this is often not enough to spend the night on a pond or in a winter forest.

Forced heating

Paraffin candles

The most effective way to insulate a winter tent is to use simple or complex heating devices or objects.

The most affordable in this regard are ordinary paraffin candles. If the temperature is not too low, they will cope with this task quite well, especially if you place the candle in a thermos flask. This achieves two goals at once. Firstly, safety increases significantly, because even if you accidentally knock over such a heat source, you will not set anything on fire. Secondly, the flask itself warms up from the candle fire and begins to intensely radiate heat.
In second place is the old, proven method of heating a tent using a hot stone. However, you will have to find this very stone, which is somewhat difficult to do in winter. Then make a fire, heat the stone on a live flame and bring it into the tent. To prevent it from burning the floor and melting the ice on the floor, you can place it in a metal pot, which, by the way, will increase the operating time of such a “heater,” or wrap it in several layers of foil.
Gas heater. A special compact device running on liquefied gas, designed specifically for tourists, fishermen and other outdoor enthusiasts. There can be two types depending on the nozzle:
With metal nozzle.
With ceramic nozzle.

They are very easy to use and do not take up much space, but their operation is limited by the size of a stationary cylinder, so it is better to take a spare one with you.

Gasoline heater. There are compact and inexpensive models. Unlike gas ones, they are even more unpretentious, but the fire hazard increases significantly. Requires increased attention and caution.
And, of course, a wood-burning stove. Not very convenient for transportation. Of all the above options, heating a winter tent using a compact stove can be called the most ideal.

There is no need to be afraid of frost and hide your noses behind double-glazed windows and an insulated safe door. A winter trip to the bosom of nature, if well prepared for it, will give you indescribable pleasure, give you a huge boost of energy and lift your spirits for more than a day or two.

Fishermen have to spend many hours in the cold and strong winds waiting for a bite. Therefore, to protect against adverse weather conditions, an ice fishing tent is necessary. Making it with your own hands at home is not difficult. Using a shelter will significantly increase the period a fisherman spends on the ice. Thanks to the use of heating devices, the air under the awning can heat up to 20 degrees.

Types of tents

There is a wide variety of options for homemade winter tents, which are used both in summer and winter. The choice of design depends on the method of ice fishing.

For stationary fishing, a frame structure is installed in one place. Lightweight mobile models that can be quickly assembled are mainly used for walking fishing.

According to its design and assembly methods tents are divided into the following types:

DIY making

Making and assembling a tent for a fisherman includes several important steps.

Frame installation

A rigid collapsible frame is assembled from several main and additional side supports, for which aluminum ski poles, metal or plastic tubes are suitable. The parts are connected using three-way and corner hinges and special tubes. The frame can be installed on a sled made from skis and other available materials using special tube fasteners.

Creation and fastening of an awning

To make an awning, the product drawing is carefully calculated in accordance with the required dimensions. The finished pattern is cut from water-repellent fabric with a two-centimeter seam allowance. The attachment points for installing the dome are secured with eyelets; they are reinforced with reinforced tape on the plastic film.

To secure the structure, screws are most often used. For a do-it-yourself winter tent, such fastenings are made from a metal rod and self-tapping screws. A piece of rod is welded to a long self-tapping screw in the form of a handle. To make it more convenient to handle screwdrivers in the cold, rubber or silicone tubes are placed on the rod.

Threaded hooks, pegs, etc. can also be used as fastening elements.

Making the floor

To make fishing in comfortable conditions, you can make a floor. Isolon (polyethylene foam), a sheet insulation material with high thermal insulation properties, is well suited for these purposes.

A piece of appropriate size is cut out of a sheet of insulation and holes for holes are made in it. Such flooring perfectly retains heat inside the shelter. The ice underneath does not melt even when using the oven.

Alternative options

If a fisherman often changes fishing spots, it makes sense to consider the most lightweight and mobile tent options.

Cape tent

This is the simplest version of a fishing tent, which can be made at home from thick polyethylene film. An isosceles triangle is cut out of polyethylene, and a zipper is sewn along the edge of the film. To support the tent dome, use an ice ax, which is extended to the appropriate length. To attach the film to the ice, holes are made along its perimeter through which pins or screws are driven into the ice.

The disadvantage of the cape is that there is quite a bit of space left inside, so the fisherman is in cramped conditions. Polyethylene film is not a very durable material.

However, thanks to its transparent structure, there is a good view while fishing. The tent is easy to transport as it is quite compact and light in weight.

Dome tent

Instead of an ice ax, a metal pole with a pointed end is used as a central support. The support can be made collapsible from several metal tubes, which makes transporting the tent easier. The pole is driven into the ice and a film or awning made of denser material is pulled from it. The canopy of a folding house is reinforced with pins or guy ropes. This design is more reliable and can also be mounted and installed fairly quickly.

Tent requirements:

the design should be light in weight and mobile;
can be quickly assembled and installed;
It is advisable to sew the fabric for the awning from tarpaulin or other moisture-resistant material;
For the frame it is recommended to use products made of aluminum or composite materials.

In addition, the tent must have good ventilation and thermal insulation to protect the fisherman from adverse weather conditions, as well as retain heat for a long time. Ideally, it is possible to provide the possibility of placing heating devices in it.

Attention, TODAY only!